DESCRIPTION.
➢ Supplied with an inlet filter.
➢ Factory-fill of lubricant and anti-vibration pads included.
➢ Low oil level switch supplied.
➢ Enclosed belt guard mounted air cooled after cooler.
➢ Receiver with a pressure gauge and an auto condensate drain valve/safety valve/check valve.
➢ Auto start and stop pressure switch.
➢ Twin cylinder two stage pump unit
➢ Operating pressure: 12bar with a 5.5kw motor 7.5HP.
➢ 500L air receiver 18.2cfm
| Particulars | Data |
| Site Maximum Ambient Temperature | 40°C |
| Site Relative Humidity | 45% |
| Site Barometric Pressure | 1.03 Kg/cm²(a) |
| Technical data at reference conditions | |
| Description | T-30 Series MODEL :7.5HP three phase |
| Capacity (FAD) | 18.20CFM, |
| Type of Compressor | Reciprocating Air Compressor |
| Discharge Pressure | 10 kg/cm²(g) |
| Main Motor Nominal Power Rating kW | 5.5KW – 7.5HP |
| Main Drive Motor Description | IP55, 415V ± 10% / 3ph / 50Hz ± 3%, Efficiency IE-2 (min.) |
| Sound Level dB(A)(2) | 98 dB(A) |
| Type of Cooling | Air Cooled |
| Control Type | Automatic Start Stop Control |
| Starter Type | DOL , |
| Air Receiver Type | 500 Ltrs |
Note:
1. Capacity (FAD) & Specific power are as per ISO:1217 Annexure C with Applicable Tolerances on Performance
Figures. 2. Noise level is confirmed in accordance to ISO:2151 measured in free field conditions.
Reviews
There are no reviews yet.